Table of Contents
Advertisement
= =
•
Your television has two kinds of screen: TWIN (2 channels) and INDEX (12 channels).
Note: After you press any multiscreen button, if you press the menu button, only the picture
adjust screen will appear.
o =
This allows you to quickly look at up to 12 channels at a time so that you can decide which one
to watch.
1
2
3
4
5
6
7
8
9
10
11
12
Notes:
• Only RF input signal will be displayed.
• You can watch the channel added in channel summary.
See page 31.
Activate the split-screen
option by pressing TWIN on
the remote control. The channel (or input) you were
watching
before pressing TWIN will appear on the left,
the new channel wilt appear on the right. The sound
will continue to come from the main screen channel
(or input). To turn split-screen off and return to
normal television viewing, press TWiN again or press
the BACK button.
Notes:
• Ma_n Screen and Split Screen wH_not d_splay the same channel or input at the same bme.
- You can enter the TWIN mode when the screen is in NORMAL or INDEX mode.
. Split-screen
functions will not work with locked channels or channels blocked by V-Chip
ratings limits. A grey screen will display instead.
• With split screen, the uicture from the component
terminal and DIGITAL-IN terminal will
not be displayed.
- ]-he aspect of MAIN CHANNEL PICTURE becomes 16:9 when you input the picture of
480p, 720p and 1080i from the component _ermlnal and DIGITAL-IN terminal.
. After you press the SELECTbuttor
and select SPLIT SCREEN when you press the
OK button, select normal screen
If you don't operate
the MAIN CHANNEL SCREEN wl!l
ae automatically
selected about 8 seconds later.
• Aspect does not work in Twin mode.
- When you press the Menu button in Twin mode, it appears only as Picture Adjust menu.
Advertisement
Table of Contents
