Switching The Display; Extended Desktop - Panasonic CF-52 Series Reference Manual

External Display
CAUTION
Before disconnecting the external display, switch to the internal LCD by pressing Fn+F3. Otherwise the displayed
image quality may become different after disconnection (e.g., wrong resolution). In this case, press Fn+F3 to reset
the image quality.
The screen may become distorted due to the following operations. In this case, restart the computer.
• Disconnecting an external display for which you have set high resolution or high refresh rate.
• Connecting/disconnecting an external display during computer operations.

Switching the Display

1
Press +
Fn F3
Each time you press the key combination:
Internal LCD
NOTE
When an external display is connected to an optional port replicator (CF-VEB522), the display switching may work dif-
ferently from the above. For further information, refer to the instruction manual of the port replicator.

Extended Desktop

The extended desktop function allows you to use the working area across both the internal LCD and the external display. You
can drag an object from the internal LCD to the external display and vice versa.
<Only for model with Mobile Intel® PM45 Express Chipsets>
1
Click [start] - [Control Panel] - [Appearance and Themes] - [Display] - [Settings].
2
Click display [2] and add a check mark for [Extend my Windows desktop onto this moni-
tor], then click [Apply].
If a check mark is already added, remove and add the check mark.
3
Make the settings for each display.
4
Select [OK].
.
Simultaneous display External display
42