Netis WF-2409 User Manual page 52

keyboard.
AP1:
Select radio mode is WDS or AP+WDS in wireless base of AP1.
Click on 'Wireless'- 'Wireless Security' and select and save None as authentication type.
Click on 'Wireless'- 'WDS Settings' ,Input WDS name (e.g.: default), input MAC address
of AP2 (00-22-4f-bc-af-5d), click add, then the record named default will appears in WDS
list.
Click on 'Wireless'- 'WDS Settings' and select the same WDS authentication type and
password with AP2's Settings and save.
Select Channel is 'Channel 6'in wireless base of AP2.
AP2:
Select radio mode is WDS or AP+WDS in wireless management-basic of AP2.
The IP address of AP2 should be 192.168.1.x (1<x<255,e.g.: x=8).
Select 'Network'-'DHCP ' ,select disable DHCP server.
Click on 'Wireless'- 'WDS Settings', Input WDS name (e.g.: Default), input MAC
address of AP1 (00-22-4f-cc-ae-f5), click add, then the record named Default will
appears in WDS list.
Select Channel is 'Channel 6'in wireless base of AP2.
Note: Before you setup WDS connection, please make sure that AP1 and AP2 is in the same
network, that is if the IP address of AP1 is 192.168.1.1, then the IP address of AP2 should be
192.168.1.x (1<x<255,e.g.: x=8).
Figure 4-38
51
WF-2409 User Manual