Wds Settings - Netis WF-2409 User Manual

**-**-**-**-**-**（e.g.: 00-22-33-da-cc-bb）.
Follow the following steps to set Wireless Access Control:
1. Enable Wireless MAC Address Filter, then select save.
2. Add MAC address you want to control in the "MAC address" field (the format is
**-**-**-**-**-**), then click "Add" button, and you will see the MAC address has displayed
in the MAC list.
3. There are two items supplied, "Permit wireless connection for MAC address listed (others
are Denied)" and "Deny wireless connection for MAC address listed (others are Permitted)",
Select the item you want, and click "Save" button.
4.5.4.

WDS Settings

If you have selected WDS or AP+WDS mode in Wireless Basic-Radio Mode, please do the
following configurations.
WDS Name: Give a description of your wireless bridge to tell apart.
WDS MAC Address: If the current working mode is "WDS" or "AP+WDS", then you
need to configure wireless bridge configuration. Enter MAC address of remote access
point, at the same time the remote access point also need to configure to "WDS"
or "AP+WDS" mode.
Encryption Type: select AES or TKIP as the Encryption Type
Key Mode: choose the format of password; it should be HEX or ASCII. The valid
character for HEX format should be numbers from 0 to 9 and letters from A to F. HEX
support mixed letter and number mode. And ASCII supports all characters that in
Figure 4-37
50
WF-2409 User Manual