Change The Controller Options; Booting The System From An Array; Pausing The Boot Sequence For Warning Messages - MSI A88X-G43 Series User Manual

Change the Controller Options

Controller Options allows the user to configure options for the boot sequence.
At the Main Menu, use the <arrow keys> to highlight "Controller Options" and press
<Enter> to enter submenu.
Toggles whether BIOS installs INT13 support
1----RAID0, 999GB, Normal(R/W)
Toggle INT13 Boot Support [ON]
Toggle Pause if Critical
Toggle Pause if Offline
Set Staggered Spinup Count [2]
Important
By default, all options are On. It is recommended that options remain On.

Booting the system from an array

This option allows the user to enable boot support.
It is recommended that this option be disabled only if the system is booted from
another device.
1. At the Controller Options submenu, use the <arrow keys> to highlight "Toggle
INT13 Boot Support " and press <Enter>.
2. Use the <arrow keys> to highlight "Toggle INT13 Boot Support".
3. Press <Enter> to toggle between On and Off.

Pausing the boot sequence for warning messages

When the Pause feature is enabled and an array goes critical, offline, or there is
another problem with the system, the boot process stops and an error message is
displayed on the screen. The user must press Enter to continue booting.
If the Pause feature is disabled, error messages are displayed briefly, but the system
continues to boot.
1. At the Controller Options submenu, use the <arrow keys> to highlight "Toggle
Pause if Critical" and press <Enter>.
2. Set pauses to the boot sequence for critical/ offline warnings. Use the <arrow
keys> to highlight Toggle Pause if Critical/ Toggle Pause if Offline.
3. Press <Enter> to toggle between On and Off.
AMD-RAID Array Configuration
Arrays
Controller Options
[OFF]
[OFF]
<↑><↓><→><←>=Choose, <Esc>=Back
<Enter>=Select Menu Item
B-9
Disks
0-00,500GB,Online
0-01,500GB,Online
0-02,1000GB,Ready
0-03,1000GB,Ready
Available Keys
AMD RAID