Setting Up Interfaces - Jaze hotspot gateway User Manual

Jaze Hotspot Gateway – User Guide
97

10.2 SETTING UP INTERFACES

To setup the LAN and WAN interfaces and assigning them to the physical ports on the Hotspot Gateway, the
following steps are involved:
1. At the Enter your option: prompt, enter 1 and then press Enter.
2. Enter the interface name for the LAN and WAN ports or press a for auto detect and plug in the
network cable for the LAN and WAN port when asked to do so.
3. Press y and hit Enter to assign the interfaces to the LAN and WAN ports and reboot the device.