Philips 150X3M Service Manual page 60

GENERAL PRODUCT SPECIFICATION
2.10 Safety and EMI requirements
Safety requirement: CCIB/CCEE (China), CE (Europe), CSA (Canada),
EMI requirement: BSMI (Taiwan), C-tick (Australia), CE (Europe),
Ergonomic Requirement:ISO13406-2, TUV/GS
Power management: EPA, Nutek, E2000.
Environmental & Low Emission : MPRII, TCO99
3.0 Electrical characteristics
Compatibility:PC2001, Windows 2000, Windows98/Me, Windows XP, NSTL
3.1 Interface signals
The input signals can be applied in two different modes:
1). D-shell Analog
Input signal: Video, H-sync, V-sync
Video: 0.7 Vp-p, input impedance, 75 ohm
Sync. : Separate sync
2). Intel DVI Digital
Input signal:
3.2 Interface Cable
3.2.1 DVI connector
Pin-assignment:
15" TFT XGA LCD CMTR-WILD2
TYPE : 150X3M/00C
BRAND : PHILIPS
1-4-02
Y C Liu
1-4-02
IEC60950 CB Report, NOMNYCE (Mexico),
PSB (Singapore), SEMKO (Nordic),
TUV (Germany), UL (USA) GOST (Russia),
B-MARK (Poland), DEMKO (Nordic), FIMKO (Nordic),
SISIR, CPA (Singapore), EZU (Czech)
FCC (USA), IC (Canada), VCCI (Japan)
TCO99, MPRII (Sweden), Nutek (Sweden)
TTL level. Input impedance 5k6 ohm
Hor. Sync Positive/Negative
Ver. Sync Positive/Negative
Single channel TMDS signal
21
150P3A LCD
8639 000 12116
590 5
57
Go to cover page