Advanced Control Of Osd - Philips 150X3M Service Manual

8 150X3M LCD
Go to cover page
Front control panel
To Lock/Unlock OSD function
The OSD function can be locked by pressing
10 seconds, the screen shows following windows for 3 seconds.
Everytime when you press
on the screen automatically. The
(mute) hotkey are still functional for brightness and mute expectively
while OSD locked
ATTENTION
OSD MAIN MENU LOCKED
Locked OSD function can be released by pressing
more than 10 seconds. While press
purpose, the screen will keep showing OSD MAIN MENU LOCKED
until OSD function unlocked and screen automatically shows
following window for 3 seconds.
ATTENTION
OSD MAIN MENU UNLOCK
Switch ON/OFF attention signals
All attention signals can be switched off by keep pressing
for more than 10 seconds if there is no video signal supplied.
ATTENTION
ATTENTION SIGNAL OFF

Advanced control of OSD

button for more than
or button, this message appears
& (brightness) , &
button for
button for OSD unlocked
button
Recover attention signals by pressing
seconds without video signal input.
ATTENTION
ATTENTION SIGNAL ON
Access Service Mode
Operating monitor with no signals (power saving mode), keep
pressing button for more than 10 seconds. Following information
will appear on the screen. Leave service mode by either re-feed
video signal or simply turn off and on the power of monitor.
SERVICE MODE
SERIAL NO.: TY 123456
HOURS OF OPERATION: 000103
Access Factory Mode
To hold and buttons then power on the monitor. Press
bring up OSD menu for confirmation as below:
HUDSON 150P V1.56D 01-03-09
Access Aging Mode
In the factory mode, once video signal removed, a full white pattern
will be display on the screen as Fig.1 in stead of power saving mode.
In other words, the power saving function will be disable in the factory
mode.
Leave factory mode by simply power off the monitor.
button for more than 10
AGING...
Fig.1
to