FLIR M-series Operator's Manual page 57

Note: When the IP address is
changed, the browser window
opened under the old IP address
will no longer be valid.
Type the new static IP address
into the browser, or return to
"Network" (Win 7/Vista) or "My
Network Places" (Win XP) to
find the camera (UPnP broad-
cast is never disabled for M-
Series cameras, even when
using a static IP address).
Network Settings
Static IP Address
To enter a static IP address, select the Static option rather than Dynamic.
The screen will refresh, and the IP , Mask, and Gateway fields will change
from grey to white, indicating they can accept user entries. Once you have
entered the appropriate information, click on the Save link.
As soon as you select Save, the system will give a warning as it restarts the
Network stack:
When the camera is in Static mode, clicking on the "Factory IP Defaults" link
will result in the following warning:
432-0003-00-10 rev 140 M-Series Operator's Manual 59