Advertisement
Audio & Microphone User Guide
6. Place the Glue Plate into position according to #3. Press firmly 15
seconds on all 3 parts of the Glue Plate
7. The adhesive pad bonds to full strength over the next 24 hours.
Therefore it is recommended to not use the headset during this
24 hour period.
8. Fasten the Clamp to the Glue Plate using the Allen screws that
were previously removed.
SPEAKERS AND MICROPHONE POSITIONING
The microphone must be positioned vertically, not horizontally, in
front of the center of the mouth.
Attach the speakers to the Velcro inside your
helmet opposite your ears (short speaker cord
for the left ear [A] and the long speaker cord
[B] for the right ear). You may want to use the
supplied Velcro pad.
Using two speakers inside the helmet may be
prohibited in certain jurisdictions. If this is the
case, you should tuck away the long corded
speaker underneath the helmet padding as
follows: Lead the speaker [B] alongside the rim
of the padding to the right side and then back
to the left side, near speaker [A]. Then place
the speaker [B] underneath the padding.
Speaker A
Speaker B
Cable
Speaker B
Speaker B
Speaker A
Advertisement
