Advertisement
Audio & Microphone User Guide
ATTACHING THE CLAMP ON THE HELMET
The Helmet Clamp must be attached onto the left part of the helmet.
Once attached, the headset unit can be mounted or released from the
Helmet Clamp at any time.
There are two methods that can be used in order to attach the
Clamp onto the helmet.
Standard Method: Recommended for most helmet types.
Plate Method: Recommended for helmets to
Glue
which the standard method cannot be applied, using
the Glue Plate included in the box.
Standard method
1. Use the enclosed Allen Wrench to loosen the two
screws on the Back Plate.
2. Slide the Back Plate between the internal padding and the external
shell of the helmet.
3. Adjust the Clamp's location so that the
microphone is located opposite the cen-
ter of your mouth, and then tighten the
screws. You may need to reposition the
Clamp repeatedly until you identify the
best spot. The microphone must be po-
sitioned vertically and not horizontally
CORRECT
INCORRECT
Advertisement
