Connecting Your Vcr; Jacks And Cables; Rf Jacks And Coaxial Cables (F-Type); Audio/Video Jacks And Cables (Rca-Type) - RCA VR354 User Manual

Hide thumbs Also See for VR354:

Table of Contents

Connections

Connecting Your VCR

Refer to these pages to help you connect your VCR.

The RF jacks provide good picture and mono sound quality,

and must be used if audio/video connections are not available

for your TV.

These jacks are required for antenna or cable-TV connections.

The RF jacks on the VCR are labeled ANT IN and RF OUT. The

Prise RF

coaxial cable supplied with your VCR is used to connect the

VCR's RF OUT jack and your TV's antenna input.

The AUDIO/VIDEO jacks provide very good picture quality and

sound, and can be used if your TV has audio/video input jacks.

These jacks are used for most audio/video connections

between components. The VCR AUDIO/VIDEO jacks are color

coded (yellow for video, white for audio). If your TV has two

inputs for audio (stereo), use the one labeled MONO.

Otherwise, you may need a Y-adapter to hear sound from

both channels.

Table of Contents