Connecting Your Vcr; Jacks And Cables - RCA VR629HFB User Manual

CONNECTING YOUR VCR
Refer to these pages to help you connect your VCR.
JACKS AND CABLES
RF Jacks and Coaxial Cables (F-type)
The RFjacks provide good picture and mono sound quality, and
must be used if audio/video connections are not available for
your TV.
These jacks are required for antenna or cable-TV connections.
The RFjacks on the VCR are labeled ANT. IN and RF OUT. The
coaxial cable supplied with your VCR is used to connect the VCR's
RF OUT jack and your TV's antenna input.
0
RF Jack
Audio/Video Jacks and Cables (RCA-type)
The AUDIO/VIDEO jacks provide very good picture quality and
stereo sound, and can be used if your TV has audio/video input
jacks.
These jacks are used for most audio/video connections between
components. The VCR AUDIO/VIDEO jacks are color coded
(yellow for video, red for right audio, and white for left audio).
If your TV only has one input for audio (mono), you may need a
Y-adapter to hear sound from both channels.
Q
Audio/Video Jack
44