CONNECTING
YOUR
VCR
Refer to these pages to help you connect your VCR.
JACKS AND
CABLES
RF Jacks and Coaxial
Cables (F-type)
The RFjacks provide good picture and mono sound quality, and
must be used if audio/video
connections
are not available for
your TV.
These jacks are required for antenna
or cable-TV connections.
The RFjacks on the VCR are labeled ANT. IN and RF OUT. The
coaxial cable supplied with your VCR is used to connect the VCR's
RF OUT jack and your TV's antenna
input.
RF Jack
Audio/Video
Jacks and Cables (RCA-type)
The AUDIONIDEO
jacks provide very good picture quality and
stereo sound, and can be used if your TV has audio/video
input
jacks. For more information
about the TV's Video Input Channel,
see page 68.
These jacks are used for most audio/video
connections
between
components.
The VCR's AUDIONIDEO
jacks are color coded
(yellow for video and red and white for audio). If your TV only
has one input for audio, you may need a Y-adapter to hear sound
from both channels.
Audio/VideoJack
52