Toshiba E-Studio 205L Quick Start Manual page 17

13.
Hole Punch Unit (MJ-6005)
This unit enables you to punch holes on printed sheets.
Install it in the Saddle Stitch Finisher (optional, MJ-025)
to use it.
14.
Hole Punch Unit (MJ-6101)
This unit enables you to punch holes on printed sheets.
Install it in the Finisher (optional, MJ-0) to use it.
Other options available are as follows. Contact your service technician or Toshiba product distributors for details.
Work Table (KK-4550)
This is a small table for placing originals while the equipment is
being operated.
• Installed on the right-hand side of the equipment.
FAX Unit (GD-1250)
This is a unit for using the equipment as a Fax machine.
• Installed inside of the equipment
2nd Line for FAX Unit (GD-1260)
This unit enables you to add a line to the Fax, making a 2nd line
available.
• Installed inside of the equipment
• The FAX Unit (optional, GD-250) is required.
Printer Kit (GM-1150, GM-1160)
This kit enables the printing function.
Install the GM-50 in the e-STUDIO255/305 and the GM-60
in the e-STUDIO355/55.
Printer/Scanner Kit (GM-2150, GM-2160)
This kit enables the printing and scanning functions.
Install the GM-250 in the e-STUDIO255/305 and the GM-260
in the e-STUDIO355/55.
Scanner Kit (GM-4150, GM-4160)
This kit enables the scanning function.
Install the GM-50 in the e-STUDIO255/305 and the GM-60
in the e-STUDIO355/55.
Desk (MH-2520)
This is a desk for the equipment.
Accessible Arm (KK-2550)
This enables a user in a wheelchair to close the Reversing
Automatic Document Feeder (MR-302, MR-3022) while
remaining seated.
& P.8 "How to use the Accessible Arm"
Description of Each Component
15.
Hole Punch Unit (MJ-6004)
This unit enables you to punch holes on printed sheets.
Install it in the Saddle Stitch Finisher (optional, MJ-02)
to use it.
Operator's Manual Pocket (KK-1660)
Keep the manual in this pocket.
Wireless LAN Module (GN-1050)
This module enables the equipment to be used in a wireless LAN
environment.
• Installed inside of the equipment
• The Antenna (optional, GN-300) is required.
• The equipment cannot be connected to the wireless and wired
LAN at the same time.
Bluetooth Module (GN-2010)
This module enables you to perform Bluetooth printing.
• Installed inside of the equipment
• The Antenna (optional, GN-300) is required.
Antenna (GN-3010)
This is used when the Wireless LAN Module or Bluetooth Module
is installed.
e-BRIDGE ID Gate (KP-2004, KP-2005)
You can login and use the equipment simply by holding the IC
card over the e-BRIDGE ID Gate.
• Installed on the right-hand side of the equipment.
Data Overwrite Enabler (GP-1070)
This is an enabler to erase the data stored temporarily when
copying, printing, scanning, Fax, Internet Fax or network Fax is
performed. It overwrites temporarily stored data with random
data.
IPsec Enabler (GP-1080)
This enables the IPsec function in this equipment.
Meta Scan Enabler (GS-1010)
This enables the Meta Scan function in this equipment.
External Interface Enabler (GS-1020)
This enables the EWB function in this equipment.
1
2
3
4
5
5