Toshiba E-Studio 205L Quick Start Manual page 15

Left / Inner side
1.
Platen sheet
& P.62 "Regular Maintenance"
2.
Original glass
Use this to copy three-dimensional originals, book-type
originals and special paper such as OHP film or tracing
paper, as well as plain paper.
3.
Touch panel
Use this to set and operate various types of functions such
as copying and fax.
& P.9 "Touch panel"
4.
Control panel
Use this to set and operate various types of functions such
as copying and fax.
& P.6 "Control panel"
5.
Toner cartridge
& P. "Replacing Toner Cartridge"
6.
Main power switch
Use this switch to turn the power of the equipment ON or
OFF.
& P.22 "Turning Power ON/OFF"
12
11
9
10
8
7
7.
8.
9.
10.
11.
12.
Description of Each Component
1
2
3
Exit support tray
This tray aligns the printed paper. Refer to the
Troubleshooting Guide for details.
Paper exit stopper
Use this to prevent the exiting paper from falling. Open
this when you make many copies or prints on a larger size
of paper such as A3, B, LD and LG.
Exit tray
Printed paper exits into this tray.
USB port
Use this connector when printing files stored in a USB
device or storing scanned data into the USB device.
Scanning area
The data of originals transported from the Reversing
Automatic Document Feeder (optional, MR-302/MR-
3022) are scanned here.
& P.62 "Regular Maintenance"
Original scale
Use this to check the size of an original placed on the
original glass.
1
4
5
6
3
2
3
4
5