Toshiba E-Studio 205L Quick Start Manual page 68

Chapter 5 MAINTENANCE & SPECIFICATIONS
e-STUDIO205L/255/305/355/455 Specifications
Model name
Type
Original glass
Printing (copying) system
Developing system
Fixing method
Photosensor type
Original scanning system
Original scanning sensor
Scanning light source
Resolution
Acceptable originals
Acceptable original size
Acceptable copy
paper size
Acceptable copy
paper weight
Warm-up time
First copy time
(A4 or LT portrait)
Continuous copy speed
Multiple copying
Excluded image
width
Reproduction
ratio
Paper supply
Exit tray loading capacity
Toner density adjustment
Exposure control
USB interface
Environment (for normal use)
Power requirements and Power
consumption
(including optional equipments)
Dimensions (equipment only)
Weight
Space occupied (equipment only)
Storage capacity
• This specification varies depending on the printing conditions and the environment.
• Specifications and appearance are subject to change without notice in the interest of product improvement.
66
DP-2090/DP-2520/DP-3000/DP-3570/DP-570
Desktop type
Fixed
Indirect electrophotographic method
2-component magnetic brush developing
e-STUDIO205L/255/305: Halogen lamp (2 pieces)
e-STUDIO355/55: Halogen lamp (3 pieces)
OPC
Flat surface scanning system
(When the Reversing Automatic Document Feeder is installed: Fixed scanning system by
feeding the original)
Linear CCD sensor
Xenon lamp
Scanning
600 dpi x 600 dpi
Writing
200 dpi x 600 dpi (Smoothing process)
Sheets, books and 3-dimensional objects
Max. A3 or LD
A3, A, A-R, A5-R, B, B5, B5-R, FOLIO, LD, LG, LT, LT-R, ST-R, COMP, 3"LG, 8.5"SQ, 8K, 6K,
Drawer
6K-R
Paper size within 00 - 297 mm (3.9" - .69") (Length),
Bypass
8 - 32 mm (5.83" - 7.0") (Width)
Drawer 6 - 05 g/m
6 - 209 g/m
Bypass 52 - 209 g/m
6 - 05 g/m
Approx. 20 seconds
e-STUDIO205L/255/305: Approx. .7 seconds
e-STUDIO355/55: Approx. 3.7 seconds
Refer to the Copying Guide.
Up to 999 copies (digital key entry)
Leading edge: 3.0±2.0 mm (0.2"±0.08"), Trailing edge: 2.0±2.0 mm (0.08"±0.08")
Copy
Both edge: 2.0±2.0 mm (0.08"±0.08")
Leading edge: .2±2.0 mm (0.7"±0.08"),
Printer Trailing edge: .2±2.0 mm (0.7"±0.08"),
Both edge: .2±2.0 mm (0.7"±0.08")
Actual size
00±0.5%
25 - 00% (in % increments)
Zoom
For the Reversing Automatic Document Feeder 25 - 200% (in % increments)
Drawer
Approx. 550 sheets (80 g/m
Bypass
Approx. 00 sheets (80 g/m
Approx. 550 sheets (80 g/m
Magnetic auto-toner system
Automatic plus manual selection from  exposure step
USB 2.0 (Hi-Speed)
Temperature: 0 ° - 30 °C (50 ° - 86 °F), Humidity: 20 - 85% (No Condensation)
AC 220-20 V±0%, 8 A (50/60 Hz): .6 kW or less
AC 5 V±0%, 2 A (50/60 Hz): .5 kW or less
AC 27 V±0%, 2 A (50/60 Hz): .5 kW or less (for Saudi Arabia 00 V version only)
575 mm (22.6") (W) x 586 mm (23.") (D) x 756 mm (29.8") (H)
e-STUDIO205L/255/305: Approx. 57 kg (26 lb.)
e-STUDIO355/55: Approx. 60 kg (32 lb.) (equipment including developer and drum)
889 mm (35") (W) x 586 mm (23.") (D)
Max. 000 sheets or until the memory is full (Toshiba's own chart)
(7 - 28 lb. Bond)
2
(7 lb. Bond - 0 lb. Index) (for continuous feed)
2
( lb. Bond - 0 lb. Index) (for single feed)
2
(7 - 28 lb. Bond) (When the automatic duplexer is used.)
2
, 20 lb. Bond)
2
, 20 lb. Bond)
2
, 20 lb. Bond)
2