JVC KD-S52 Service Manual page 6

QQ
3.1.4 Removing the side panel (See Fig.5) 3 7 63 1515 0
• Remove the front panel assembly as required.
(1) From the left side of the main body, remove the two screws
C and screw D attaching the side panel to the main body.
(2) Take out the side panel from the main body.
3.1.5 Removing the rear bracket (See Fig.6)
• Remove the bottom cover.
(1) From the back side of the main body, remove the three
screws E, three screws F and three screws G attaching the
rear bracket to the main body.
(2) Take out the rear bracket.
3.1.6 Removing the main board (See Figs.6 and 7)
• Remove the front panel assembly, bottom cover and side pan-
el.
Reference:
Remove the front chassis assembly as required. (Refer to
"3.1.3 Removing the front chassis assembly")
(1) From the back side of the main body, remove the three
screws E attaching the rear bracket to the main body. (See
Fig.6.)
(2) From the bottom side of the main body, remove the two
TE
screws H attaching the main board to the main body. (See
L 13942296513
Fig.7.)
(3) Disconnect the connector
the CD mechanism assembly and take out the main board
with the rear bracket. (See Fig.7.)
Reference:
Remove the rear bracket from the main body as required. (See
"3.1.5 Removing the rear bracket".)
www
.
1-6 (No.MA218)
http://www.xiaoyu163.com
on the main board from
CN501
x ao u163
y
i
http://www.xiaoyu163.com
2 9
8
C D
Side panel
Rear bracket
F
E
Q Q
3 6 7 1 3 1 5
CN501
H
co
.
9 4 2 8
C
Fig.5
G
F G
G
E
Fig.6
0 5 8 2 9 9 4 2 8
Main board
H
Fig.7
m
9 9
9 9