Gardenline GVM-600 User Manual page 7

GB
CE DECLARATION OF CONFORMITY (GB)
We declare under our sole responsibility that this
GVM-600 Electric Lawn Rake
is in conformity with the following standards or standardized documents:
EN60335-1, EN60335-2-92, EN13684, EN55014-1, EN55014-2,
EN61000-3-2, EN61000-3-3, EN50336
in compliance with the provisions of the directives:
98/37/EC, 73/23/EEC, 89/336/EEC, 2000/14/EC, 2002/95/EC, 2002/96/EC
Measured sound power level; Lwa = 97 dB(A)
Guaranteed sound power level; Lwa = 97 dB(A)
2000/14/EC: The guaranteed sound power level Lwa is lower than 100 dB(A). Conformity
assessment procedure according to Annex VI.
Notified body: TUV product service GmbH
from 01-11-2006
ZWOLLE NL
J.A. Bakker - van Ingen
CEO Ferm BV
It is our policy to continuously improve our products and we therefore reserve the right to
change the product specification without prior notice.
Ferm BV • Lingenstraat 6 • 8028 PM Zwolle • The Netherlands
14
J. Lodewijk
Quality Manager Ferm Global
Gardenline
Wear ear and eye protection.
Wear gloves to protect your hands
Wear safety boots to protect against electric shock
Keep bystanders away
Outdoor noise
Faulty and/or discarded electrical or electronic apparatus have to be collected
at the appropriate recycling locations. Please contact your local authoritiy for
further details.
General safety instructions
Attention! When using electric machines always observe the safety regulations applicable
in your country to reduce the risk of fire, electric shock and personal injury. Read the follo-
wing safety instructions and also the enclosed safety instructions. Keep these instructions
in a safe place!
1. Keep work area clear
Cluttered areas and benches invite injuries.
2. Consider work area environment
Do not expose power tools to rain. Do not use power tools in damp or wet locations.
Keep work area well lit. Do not use power tools in presence of flammable liquids or
gases.
3. Guard against electric shock
Prevent body contact with grounded surfaces (e.g. pipes, radiators, refrigerators).
4. Keep visitors away
Visitors should be kept away from the work area at all times. Do not let visitors handle
the machine at any time.
5. Store unused tools
When not in use keep tools out of reach of children. Store in a dry and secure loca-
tion.
6. Do not force tool
Do not apply undue pressure as this may affect performance and may cause damage
to the machine. Forcing the job also increases the potential for accidents.
7. Use right tool
Do not force small tools or attachments to do the job of heavy duty tool. Do not use a
tool for purposes not intended.
Gardenline
GB
07