Service Position To Check The Mechanism Deck; Mechanism Deck Block - Sony Digital8 DCR-TRV250 Service Manual

[SERVICE POSITION TO CHECK THE MECHANISM DECK]

Connection to Check the Mechanism deck
To check the mechanism deck, set the VTR to the "Forced VTR power ON" mode. (Or, connect the control switch block
(SS-3000) to the CN1009 of VC-305 board and set the power switch to the "PLAYER" position.)
Operate the VTR function using the adjustment remote commander (with the HOLD switch set in the OFF position).
Setting the "Forced VTR Power ON" mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, set data: 02 and
press the PAUSE button of the adjustment remote
commander.
How to move up the cassette
compartment manually
Press the cassette compartment
in the direction of the arrow
A
to move it up in the direction of
the arrow B.
A
VC-305 board
FP-577 flexible board
Cabinet (R) block assembly
When exiting the "Forced VTR Power ON" mode, connect the control
switch block (SS-3000) to the CN1009 of VC-305 board. Or, when
ejecting the cassette, connect the control switch block (SS-3000) to
the CN1009 of VC-305 board. and press the EJECT switch.
Exiting the "Forced VTR Power ON" mode
1) Select page: 0, address: 01, and set data: 01.
2) Select page: D, address: 10, data: 00, and press the PAUSE
button of the adjustment remote commander.
3) Select page: 0, address: 01, and set data: 00.
B
Eject switch
Control switch block
(SS-3000)
2-23
Mechanism deck
Info lithium battery
(L series)
Adjustment remote
I/F unit for LANC control
commander (RM-95)
(J-6082-521-A) (Note)
Note : The "Jig Modification" is necessary for connecting
the adjusting remote commander to this set.
Modify the jig by referring to page 1-3.
DCR-TRV250
Battery panel
block assembly
AC power
AC IN
adaptor
CPC jig connector
(J-6082-539-A) (Note)
Contacting
surface