Brother HL-5380DN User Manual page 94

How to reprint the last job
a
Make sure that the REPRINT setting is ON by using the buttons on the control panel to enter the SETUP
menu.
Note
If you print with the printer driver we have supplied with the printer, the settings for Use Reprint in the printer
driver will take priority over the settings made on the control panel. (For more information, see Use Reprint
on page 41.)
b
Press Go for about 4 seconds.
COPIES =1
c
Press + to enter the number of copies you want.
COPIES =3
d
Press Set.
If you press Go, the LCD shows PRESS SET TO PRINT.
PRINTING
h
COPIES =1
Note
• Pressing + or - makes the number of reprint copies increase or decrease. You can choose between 1
and 999 COPIES.
• If you wait 30 seconds to continue the control panel operation, the LCD leaves the REPRINT setting
automatically.
When there is no last job data in memory
If the printer does not have reprint data in the memory and you press Go for about 4 seconds, the LCD will
show NO DATA STORED.
Canceling reprinting data
If you want to cancel the current reprint job, press Job Cancel. Job Cancel also allows you to cancel a
paused reprint job.
Control Panel
4
4
4
4
84