Brother HL-5380DN User Manual page 30

d
Pull out the MP tray support flap (1).
e
Put paper in the MP tray. Make sure that the paper stays under the maximum paper mark (b).
Note
• DO NOT put more than 3 envelopes in the MP tray.
• Envelope joints that are sealed by the manufacturer should be secure.
• The side to be printed on must be face up.
• All sides of the envelope should be properly folded without wrinkles or creases.
f
While pressing the paper-guide release lever (1), slide the paper guide to fit the paper size.
1
1
Printing Methods
2
20