Advertisement
POWER UP
STEP 3
Turn on the power points for both the White Adaptor (A) and the Black Adaptor (C).
Check that the Power and Powerline lights on both the White Adaptor (A) and the Black
Adaptor (C) flash and then turn a solid colour.
The Ethernet light on the White Adaptor (A) should turn to a solid green (the Ethernet light
on the Black Adaptor (C) won't turn green until the Set Top Box is fully set up).
WHAT DO THE LIGHTS MEAN?
Ethernet
Solid on: the Ethernet
port is linked, but there
is no activity.
Blinking: there is traffic
between an Ethernet
port and the Powerline
network.
Off: there is no
Ethernet connection.
RETURN TO THE
IF OK:
SET TOP BOX GUIDE
If all of the above have been checked, your internet connection should be set up correctly.
Go back to Step 2 in your Set Top Box Quick Install Guide to finish setting up Optus TV.
1
2
3
(A)
1
2
(C)
Powerline
Solid on: the
Adaptor is connected to
a Powerline network.
Blinking: the Adaptor is
sending or receiving data.
Off: the Adaptor has
not found any other
compatible Powerline
devices.
3
1 Ethernet light
2 Powerline light
3 Power light
Power
Solid on: the electrical
power is switched on.
Blinking: the Adaptor is
in the process of resetting,
power saving mode, or
security setup.
Off: there is no
electrical power.
Advertisement
