Advertisement
CONNECT THE WHITE
STEP 1
ADAPTOR TO YOUR MODEM
BITS YOU'LL NEED:
Go to the room with your existing modem.
Plug one end of the Ethernet Cable (B) into the Ethernet port located
at the top of the White Adaptor (A).
Plug the other end into a spare Ethernet port on your existing modem.
Plug the White Adaptor (A) into a power point near your existing modem.
IF YOU'RE USING POWER BOARDS
DO plug the power board into the White Adaptor (A).
DON'T plug the White Adaptor (A) directly into a power board unless it is plugged
into the 1st power socket closest to the cord.
DON'T plug the White Adaptor (A) directly into a surge-protected power board.
A.
WHITE ADAPTOR
(B)
YOUR MODEM
(A)
B.
ETHERNET CABLE
(A)
WALL POWER POINT
POWER BOARD
(A)
POWER BOARD
Advertisement
