Gira Electronic timer Installation Instructions Manual page 9

Electronic timer
GIRA
Info
Installation Instructions
5.2. Selecting the Timer Function
When the timer function is activated the light is turned
on for a preset time between 1 minute and up to 23
hours and 59 minutes.
Choosing the timer function
Select memory C by shortly depressing the MODE
key (C flashes in the display). This memory contains
the timer function.
Note:
Programm memories A and B are occupied by
switching time events and must not be selected for
activating the timer function.
The timer function is factory-preset to a period of 15
minutes.
Prog Zufall Astro
C
Uhrzeit
Datum
By shortly tipping (1.5 sec. max.) the ON key, you can
start the timer function. This turns on the consumer.
The display counts down.
The colon between the hours and minutes flashes.
The light can be turned off any time by shortly tipping
(1.5 sec. max.) the OFF key.
Prog Zufall Astro
ON
C
Uhrzeit
Datum
When the counter reads '0' the light is turned off. The
display then reads the preset time (factory setting is
15 min.).
By depressing the ON key, the preset time can be re-
started, even during the 'time lapse'.
Individual timer period setting
To increase the timer period, depress the ON key for
more than 1.5 sec. To decrease, depress the OFF key
for more than 1.5 sec.
Electronic timer
Mo
Di
Mi
Do
Fr
Sa
So
Mo
Di
Mi
Do
Fr
Sa
So
3/07
Prog
C
Uhrzeit
Datum
Setting range:
1 minute minimum.
23 hours, 59 minutes maximum.
Setting an individual timer period does not trigger any
switching event.
5.3. Manual Operation
Using the ON key turns ON the consumer, whereas
the OFF key turns it OFF.
For this purpose the key must be held depressed for
at least 1 second.
5.4. Winter-/Summer Time Selection
By shortly depressing the SET key, you can change
between:
- Winter time and
- summer time
Zufall Astro
Mo
Di
Mi
Do
Fr
Sa
So
Page 9 of 14