Mode Selection - Gira Electronic timer Installation Instructions Manual

Electronic timer
GIRA
Info
Installation Instructions
Sunrise hour astro time shift
Use key ON or OFF to set the hour (-1, -0, 0, 1) by
which the astro curve is to be shifted.
-1: Shifting the astro curve 1 hour towards
earlier times.
1: Shifting the astro curve 1 hour towards later
times.
-0, 0: No shifting within the hour range, sign for
shifts within the minute range (please refer
to the next programming step).
Accept by shortly depressing the SET key.
Zufall Astro
Prog
ON
Uhrzeit
Datum
Sunrise minute astro time shift
Use key ON or OFF to set the minute (00..59) by
which the astro curve is to be shifted.
Accept by shortly depressing the SET key.
Prog Zufall Astro
ON
Uhrzeit
Datum

5. Mode Selection

5.1. Selecting the Program Memory
As described in chapter 4.4, two separate program
memories with up to 18 switching time events can be
occupied.
Thus, two individual switching time programs can be
made up and one of them, in each case, activated by
selecting the corresponding program memory.
Shortly depressing the MODE key selects the pro-
gram memory (A or B), whose switching time events
are to be executed.
Note:
Memory C contains the timer function (refer to Chap-
ter 5.2.) and cannot be occupied by switching time
events.
Electronic timer
Mo
Di
Mi
Do
Fr
Sa
So
Mo
Di
Mi
Do
Fr
Sa
So
3/07
Sunset hour astro time shift
Use key ON or OFF to set the hour (-1, -0, 0, 1) by
which the astro curve is to be shifted.
-1: Shifting the astro curve 1 hour towards
earlier times.
1: Shifting the astro curve 1 hour towards later
times.
-0, 0: No shifting within the hour range, sign for
shifts within the minute range (please refer
to the next programming step).
Prog Zufall Astro
Uhrzeit
OFF
Datum
Sunset minute astro time shift
Use key ON or OFF to set the minute (00..59) by
which the astro curve is to be shifted.
By shortly depressing the SET key, the new astro
times are stored in the memory.
Prog
Uhrzeit
OFF
Datum
The display shows the program memory selected.
Only the switching time events programmed in this
selected program memory are executed.
If neither programm memory and no timer function C
has been selected, the Electronic Time Switch is in
manual operation. Programmed switching time
events and the twillight function will then not be exe-
cuted.
Prog Zufall Astro
A
Uhrzeit
W
Datum
Mo
Di
Mi
Do
Fr
Sa
So
Zufall Astro
Mo
Di
Mi
Do
Fr
Sa
So
Mo
Di
Mi
Do
Fr
Sa
So
Page 8 of 14