Table of Contents
Advertisement
Electronic timer
GIRA
Info
Installation Instructions
Product features:
•
Simple operation through a four-key field.
•
Two independent program memories for a total of
up to 18 switching time events (e. g. nine ON and
nine OFF times).
•
Time switch function.
•
Random function.
3. Installation Instructions
The attachment can only be placed into service in
conjunction with the Electronic timer insert.
Electronic timer insert
mm flush box (recommendation: deep box).
The connecting terminals of the insert must be down.
Plug attachment
onto the insert together with frame
.
Electrical contacting is established through plug
4. Programming
Note:
If no operation is made for longer than 2 minutes dur-
ing programming, the electronic timer will automaticliy
return to displaying the current data.
Programming can be cancelled any time by pressing
the SET key for about 3 seconds.
4.1. Setting Current Data
Prior to entering your data please make a reset to
bring back the device to factory default setting:
Depress the MODE and SET keys at the same time
until all display segments light up for a short time (ap-
prox. 7 sec.). This completes the reset.
To enable the Electronic Time Switch to start its ope-
ration, please enter the current data:
Hold the SET key depressed until the display reads
prog.
Electronic timer
should be installed in a 60
•
Astro function.
•
Summer/winter time change-over.
•
Individual astro function by astro time shift.
•
Driving via extensions (insert).
•
Reset facilitates resetting to factory adjustment.
•
Up to 24-hour power reserve (maintenance-free,
without batteries).
l
.
Use key ON or OFF to select the following settings
(please refer to the diagramm):
Time, Date
:
A:
B:
Astro
:
Mode
ON
3/07
Set current data
Programming memory A
Programming memory B
Shift astro times
Set
OFF
Page 2 of 14
Advertisement
Table of Contents
