Page 1
System 3000 Blind timer and timer BT, Operating top unit BT Blind timer and timer BT Order no.: 5367 .. Operating top unit BT Order no.: 5368 .. Operating instructions Safety instructions Electrical devices may only be mounted and connected by electrically skilled persons. Serious injuries, fire or property damage possible.
System 3000 Blind timer and timer BT, Operating top unit BT Cover frame (3a) Blind/shutter up / light on, brighter (3b) Blind/shutter down / light off, darker (4a) Disabling function (4b) Activate Bluetooth coupling, Activating / deactivating automatic oper- ation Function LED Status LED LED display...
Requirement for operation via app is a mobile end device with Bluetooth interface, running the Android operating system or iOS. ■ Download and install the Gira System 3000 app from the iTunes App Store (iOS) or the Google Play Store (Android). Couple mobile end devices via Bluetooth Precondition: The insert must be connected and switched off.
Page 4
4 seconds. The blue LED flashes slowly. The coupling mode is active for one minute. ■ Start the Gira System 3000 app and search for device to be coupled. The "Gira Timer" cover is displayed in the app. ■ Perform coupling.
System 3000 Blind timer and timer BT, Operating top unit BT ■ As soon as the desired ventilation position has been reached, release the buttons and press the button (3a) within the next 4 seconds. The ventilation position is saved. The blind/shutter moves back to the upper end position. If the ventilation position is saved again, the old value is overwritten.
Page 6
System 3000 Blind timer and timer BT, Operating top unit BT Activating/deactivating the disabling function (only 2-gang cover) The disabling function disables extension operation and operation via the app and deactivates automatic operation. Manual operation using buttons (3a) and (3b) continues to be possible. With Venetian blinds, extension operation in the "UP"...
System 3000 Blind timer and timer BT, Operating top unit BT ■ Fit the cover with frame on the insert. ■ Switch on mains voltage. If the status LED (6) flashes red three times at repeated intervals, the cover was previously con- nected to another insert.
Page 8
System 3000 Blind timer and timer BT, Operating top unit BT Parameters Setting options, Explanations Default setting Night mode On, Off In night mode, the status LED is not perman- ently lit, but only for 5 seconds after a button is pressed.
Page 9
System 3000 Blind timer and timer BT, Operating top unit BT Parameters Setting options, Explanations Default setting Only for DALI Maximum colour temperat- maximum colour temperature that can be set. Power control unit 5000 ... 10000 K Switch-on colour temperature: The light is switched on with a saved colour temperature.
Page 10
System 3000 Blind timer and timer BT, Operating top unit BT Parameters Setting options, Explanations Default setting Travelling time 1 ... 360 s Absolute time which the blind/shutter requires from the top to the bottom end position. The entry is essential if position movements are to Default setting: 120 s occur.
(100 %) can be set for Venetian blind inserts. 12 Conformity Gira Giersiepen GmbH & Co. KG hereby declares that the radio system type art. no. 5367 .. and 5368 .. meets the directive 2014/53/EU. You can find the full article number on the device. The complete text of the EU Declaration of Conformity is available under the Internet address: www.gira.de/konformitaet...
Page 12
System 3000 Blind timer and timer BT, Operating top unit BT Gira Giersiepen GmbH & Co. KG Elektro-Installations- Systeme Industriegebiet Mermbach Dahlienstraße 42477 Radevormwald Postfach 12 20 42461 Radevormwald Deutschland Tel +49(0)21 95 - 602-0 Fax +49(0)21 95 - 602-191 www.gira.de...