GE Interlogix KTD-125 User Manual page 25

KTD-125/127 PTZ Receivers User Manual
2)
To mount the housing use installer-provided fasteners and the four
mounting holes in the mounting flanges (Figure 29).
Note: Install the housing so that it is level and the door opens to the left.
Figure 29. Holes in the housing's mounting flanges
Note: Do not reinstall the main relay board until instructed to do so in section 6, Completing
and Testing the Installation (All Units).
1040823A / June 2003
Installing the KTD-127W
Mounting
holes (4)
25