Belkin N1 MIMO Wireless User Manual page 74

Manually Configuring Network Settings
3.
.. Next.to."Configure".(2),.if."Manually".is.selected,.your.Modem.
Router.will.need.to.be.set.up.for.a.static.IP.connection.type..
Write.the.address.information.in.the.table.below..You.will.need.to.
enter.this.information.into.the.Modem.Router.
4.
. If.not.already.set,.at."Configure:",.choose."Using.DHCP.Server"..
This.will.tell.the.computer.to.obtain.an.IP.address.from.the.
Modem.Router..
5.
. Close.the.window..If.you.made.any.changes,.the.following.
window.will.appear..Click."Save".
Restart the computer. When the computer restarts, your network
settings are now configured for use with the Modem Router.
72 72
1
2
3
4
5
6
7
8
9
10