Belkin N1 MIMO Wireless User Manual page 47

Using the Web-Based Advanced User Interface
Setting WPA-PSK
1)
From.the."Security.Mode".drop-down.menu,.select."WPA-PSK..
(no.server)".
2)
For."Encryption.Technique",.select."TKIP".or."AES"..This.setting.
will.have.to.be.identical.on.the.clients.that.you.set.up.
3)
Enter.your.pre-shared.key..This.can.be.from.eight.to.39.characters.
and.can.be.letters,.numbers,.or.symbols..This.same.key.must.be.
used.on.all.of.the.clients.that.you.set.up.
4)
Click."Apply.Changes".to.finish..You.must.now.set.all.clients.to.
match.these.settings.
45