3. Default Transponder
Enter Frequency: Press the numeric (0-9) key to enter the
●
frequency.
Select Polarization: Press the
●
"Vertical" or "horizontal".
Enter Symbol Rate: Press the numeric (0-9) key to
●
enter the Symbol Rate
Select FEC: Press the
●
2/3, 3/4, 5/6 or 7/8)
Press the OK key to confirm and move to the next
screen.
Press the BACK key to go to previous screen.
4. Signal Test
After the signal setup there will be signal test screen
showing Lock status on Home transponder.
If "Front end locked" says "Yes" it means that the
receiver has locked to signal from the satellite. If it says
"No", and the "POWER" and "Signal Quality" bars are
0%, you need to check your antenna alignment.
Press the OK key to confirm and move to the next
●
screen.
The locked channel will be displayed.
Press the BACK key to go to previous screen.
●
5. HD TV Setup
If your receiver is connected to the HD TV with HDMI
cable, the resolution setting screen will be displayed.
The optimal resolution for your combination of TV-set
and receiver will be highlighted as default. If you want
to select another resolution move the cursor with the
/
and press the OK key to select.
T
T
E
E
L
L
L
L
I
I
T
T
E
E
R
R
E
E
C
C
/
key to select FEC (1/2,
E
E
I
I
V
V
E
E
R
R
FIRST INSTALLATION
/
key to select
17