2-Sided Receiving - Panasonic UF-7100 Operating Instructions Manual

2-Sided Receiving

Set Fax Parameter No. 95 (DUPLEX PRINT) to Valid. (See Note 5) (See page 110)
Under the following conditions your machine cannot receive 2-Sided
transmissions. It will automatically change to a 1-Sided reception.
- When receiving Legal size document(s) with 600 dpi Resolution.
- When the machine detects memory overflow.
- When the paper except for the size of A4, Letter or Legal is set in
the paper tray.
2 3
Lift the handset
Remove any original(s)
from the ADF.
2
Replenish the recording paper, toner or
clear the jam.
The document(s) stored in memory will be
automatically printed.
Ex: A4 to A4 96%
A4 to Letter 90%
Letter to Letter 96%
Legal to Letter 75%
NOTE
4. If the received document is extremely long
(over 39% longer than the recording paper),
the document is divided into separate pages.
(When printing on separate pages, the bottom
13 mm of the 1st page's data will overlap
on top of the next page.)
5. If the machine detects memory overflow while receiving in the Duplex Print setting, it will
switch from duplex printing to single-sided printing.
4
Press
up the telephone.
The machine starts receiving
the document(s).
START
then hang
START
Overlap print.
13 mm
49