Panasonic UF-7100 Operating Instructions Manual page 111

No. Parameter
121 AUTO RESET TIMER
140 LAN RELAY XMT
REQUEST
142 RELAY XMT
(A.K.A. LAN RELAY
STATION ON UF-770I)
143 RELAY XMT REPORT
144 EMAIL CHARACTER
SET
145 SENDER SELECTION
146 POP TIMER
147 AUTO POP RCV
148 DELETE POP RCV
EMAIL
149 DELETE POP ERROR
EMAIL
150 IFAX RETURN RECEIPT
151 EMAIL HEADER
FORMAT
152 SUB-ADDRESS
ROUTING
153 TSI ROUTING
154 ROUTING HEADER
FORMAT
155 PRINT ROUTED
DOCUMENT
Continued on the next page...
Setting Setting
Number
1 OFF Selecting whether the contorol
2 30 sec. panel reset time.
3 1 min.
4 2 min.
5 3 min.
6 4 min.
1 Invalid Selecting whether the machine performs LAN Relay
XMT Request.
2 Valid
1 Invalid Selecting whether the machine accepts and performs
G3 relayed transmission. (Relay Station Functions)
2 Valid
1 Off Setting how the COMM. Journal for relayed
transmission is sent to the originator.
2 Always
Off
3 Inc. Only
Always
Inc. Only : Send only if communication has failed.
1 Japanese Selecting the Character Set when receiving or sending
email text.
2 English
1 Invalid Selecting a pre-programmed sender's name and email
address before each transmission.
2 Valid
---- 0 to 60 min. Setting the time interval for the machine to check for
email on the POP Server.
3
(0 = Does not check the POP Server for email.)
1 Invalid Selecting whether the machine automatically
downloads an email from the POP Server.
2 Valid
1 Invalid Selecting whether the email will be deleted
automatically after retrieval from the POP Server.
2 Valid
1 Invalid Selecting whether to delete the email that includes an
incompatible file attachment from the POP Server.
2 Valid
1 Invalid Selecting whether to send a return receipt when
receiving from another Panasonic Internet Fax.
2 Valid
1 All Selecting the header information to print when an
email is received. (Normally used for Troubleshooting.
2 Subject/
It shows the path of the email transmission before
From/To
arriving at your machine.)
3 Off
1 Invalid Selecting whether to automatically route a received
email using ITU-T sub-address.
2 Valid
1 Invalid Selecting whether to route a received fax to an email
address preprogrammed in Phone Book using the
2 Valid
originating fax's Numeric ID (TSI frame information).
1 Originator Selecting the type of email header to be included in the
"From" field of each routed faxes.
2 Relay Station
Originator
Relay Station :The routing station's email address
1 Inc. Only Selecting whether a received fax to be routed is always
printed or only when the routing operation fails.
2 Always
Comments
: Don't send.
: Always send.
:The originating fax machine's TSI will
appear in the "From" field of the
routed email.
will appear in the "From" field of the
routed email.
111