Panasonic UF-7100 Operating Instructions Manual page 109

No. Parameter
022 SUBSTITUTE RECEIVE
023 REC. PAPER SIZE
024 PRINT REDUCTION
025 REDUCTION RATIO
026 POLLING PASSWORD
027 POLLED FILE SAVE
028 STAMP AT MEMORY
XMT
030 DRD SERVICE
031 INCOMPLETE FILE
SAVE
034 ENERGY SAVER MODE
035 DAYLIGHT TIME
037 RECEIVE TO MEMORY
038 ACCESS CODE
039 PIN CODE ACCESS
048 TELEPHONE LINE
049 PSTN ACCESS CODE
052 DIAGNOSTIC
PASSWORD
Continued on the next page...
Setting Setting
Number
1 Invalid Selecting whether the machine receives to memory
when the recording paper runs out, toner runs out or
2 Valid
the recording paper is jammed.
(----) Selecting the Paper Tray and paper size.
(See page 116)
1 Fixed Selecting print reduction mode.
Fixed :Reduce received document according to
2 Auto
Auto :Reduce received document according to the
70 70% Selecting the fixed print reduction ratio from 70% to
100%. This parameter functions only when the fixed
---- ----
print reduction is selected on Fax Parameter No. 24.
100 100%
(----) Setting a 4-digit password for secured polling.
1 Invalid Selecting whether the machine retains the polled
document in memory even after the document is polled
2 Valid
once.
1 Invalid Selecting whether the machine stamps the original
documents when storing the documents into memory.
2 Valid
(depending on the Stamp setting on the Control Panel.
If the setting is "Invalid", the machine will not stamp
even if the Stamp LED light is ON)
1 Invalid Selects whether the DRD service is used (if available).
If this parameter is set to "Valid", your machine detects
2 Valid
the specified ring pattern only to receive a document
automatically.
1 Invalid Selecting whether the machine retains the document in
memory if the document is not successfully
2 Valid
transmitted.
1 Invalid Select a Energy Saver mode and time.
1: Invalid / 2: Power Saver / 3: Sleep / 4: Shutdown
2 Power Save
Mode timer: 1-240 min.
3 Sleep
4 Shutdown
1 Invalid Selects whether to enable the daylight time feature.
2 Valid
(----) Enter a 4-digit password used to print out the received
document in memory by using F8-5 (RCV TO
MEMORY). When F8-5 is set to On, this parameter will
not be shown on the LCD display. If you wish to
change the password, F8-5 is set to Off first.
(----) Enter a 4-digit Access Code to secure the machine
from unauthorized use. (See page 84)
1 None Selecting the access method (Prefix or Suffix) to dial a
number with PIN Code.
2 Suffix
3 Prefix
1 PSTN Selecting the type of line connected.
2 PBX
(----) Setting PSTN Access Code. (max. 4 digits).
(----) Setting the password for Remote Diagnostic Mode.
Please ask your Panasonic Authorized Dealer for
details.
Comments
setting of Parameter No. 25.
length of received documents.
109