Sony XCG-H280E Technical Manual page 31

MemoryShotControl
Address
0xA0002200 MemoryShotMode
0xA0002208 MemoryShotNumberOfMe
mory
0xA0002204 MemoryShotNumberOfIm
agesInMemory
0xA000220C MemoryShotNumberOfIm
agesToRead
0xA0002210 MemoryShotMultiFrameR
ead
0xA0002214 MemoryShotSingleRead
TransportLayerControl
The registers 0x00000000 to 0x00009FFF conform to the Bootstrap register of GigE Vision.
Address
0x0000A000 PayloadSize
0x0000A020 GevIPConfigurationStatus
0x0000A030 GevTimestampResetSignal
Selector
ChunkDataControl
Address
0x0000A100 ChunkModeActive
0x0000A104 ChunkSelector
0x0000A108 bit0 ChunkTriggerCounterEnab
le
0x0000A108 bit1 ChunkTemperatureEnable
0x0000A108 bit2 ChunkLineStatusAllEnable
0x0000A108 bit3 ChunkExposureTimeEnabl
e
0x0000A108 bit4 ChunkGainAnalogEnable
0x0000A108 bit5 ChunkUserMemoryEnable
0x0000A108 bit6 ChunkLineOutputStatusEn
able
0x0000A108 ChunkImageEnable
bit31
For More Information Please Call Aegis Electronic Group, Inc. * (888) 687-6877 Phone * aegis-g2@aegiselect.com * http://www.aegis-elec.com
Name Type
R/W
R/O
R/O
R/W
W/O
W/O
Name Type
R/O
R/O
R/W
Name Type
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/O
Data
0 Sets Memory Shot mode to OFF.
1 Sets Memory Shot mode to ON.
16 Displays the number of memory channels used for Memory
Shot.
– Displays the number of images stored in memory at present.
1 - 16 Specifies the number of images for multiple-image reading.
1 Executes multiple-image reading.
1 Executes single-image reading.
Data
– Displays the payload size.
0 IPConfiguration is configured with None.
1 IPConfiguration is configured with PersistentIP.
2 IPConfiguration is configured with DHCP.
3 IPConfiguration is configured with LLA.
4 IPConfiguration is configured with ForceIP.
0 Disables selection of the time stamp reset signal.
1 Resets the time stamp at the falling edge of GPI1.
2 Resets the time stamp at the falling edge of GPI2.
5 Resets the time stamp at the rising edge of GPI1.
10 Resets the time stamp at the rising edge of GPI2.
Data
0 Sets Chunk mode to OFF.
1 Sets Chunk mode to ON.
Selects items to be added to the chunk data..
0 - 1 Sets to add the trigger counter to the chunk data.
0 - 1 Sets to add the temperature [°C] to the chunk data.
0 - 1 Sets to add GPI signal to the chunk data.
0 - 1 Sets to add the exposure time to the chunk data.
0 - 1 Sets to add the gain to the chunk data.
0 - 1 Sets to add the user memory to the chunk data.
0 - 1 Sets to add GPO signal to the chunk data.
1 Indicates to add images to the chunk data.
Description
Description
Description
31