Sony XCG-H280E Technical Manual page 25

Address
0xA0000110 PixelFormat
PixelSize
PixelColorFilter
0xA0000130 TestImageSelector
0xA0000134 GainAutoAreaHighlight
0xA0000138 GainAutoAreaWidth
0xA000013C GainAutoAreaHeight
0xA0000140 GainAutoAreaOffsetX
0xA0000144 GainAutoAreaOffsetY
0xA0000154 BalanceWhiteAutoAreaHi
ghlight
0xA0000158 BalanceWhiteAutoAreaWi
3)
dth
0xA000015C BalanceWhiteAutoAreaHei
3)
ght
0xA0000160 BalanceWhiteAutoAreaOff
setX
0xA0000164 BalanceWhiteAutoAreaOff
setY
1)This value is unique to the model.
2)XCG-H280E only
3)XCG-H280CR only
AcquisitionControl
Address
0xA0000200 AcquisitionMode
0xA0000210 AcquisitionStart
0xA0000214 AcquisitionStop
0xA0000204 AcquisitionFrameCount
0xA0000220 AcquisitionFrameRate
For More Information Please Call Aegis Electronic Group, Inc. * (888) 687-6877 Phone * aegis-g2@aegiselect.com * http://www.aegis-elec.com
Name Type
R/W
R/O
R/O
R/W
R/W
R/W
R/W
R/W
R/W
R/W
3)
R/W
R/W
R/W
3)
R/W
3)
Name Type
R/W
W/O
W/O
R/W
R/W
Data
0x01080001 Sets to 8-bit black and white (Mono8).
0x010C0004 Sets to 10-bit black and white (Mono10 Packed).
0x010C0006 Sets to 12-bit black and white (Mono12 Packed).
0x01080009 Sets to bayer 8-bit (BayerRG8).
0x010C0027 Sets to bayer 10-bit (BayerRG10Packed).
0x010C002B Sets to bayer 12-bit (BayerRG12Packed).
8 Configures with 8-bit pixels (Bpp8).
10 Configures with 10-bit pixels (Bpp10).
12 Configures with 12-bit pixels (Bpp12).
0 Displays the color filter (no).
1 Displays the color filter (RG).
0 Sets the test image to OFF.
1 Sets the test image to gray scale chart.
2 Sets the test image to color chart.
0 Sets the auto gain detection frame to OFF.
1 Sets the auto gain detection frame to ON.
1 - 100 Sets the auto gain detection frame (H).
1 - 100 Sets the auto gain detection frame (V).
0 - 99 Sets the offset of the auto gain detection frame (H).
0 - 99 Sets the offset of the auto gain detection frame (V).
0 Sets the white balance detection frame to OFF.
1 Sets the white balance detection frame to ON.
0 - 100 Sets the white balance detection frame (H).
0 - 100 Sets the white balance detection frame (V).
0 - 100 Sets the offset of the white balance detection frame (H).
0 - 100 Sets the offset of the white balance detection frame (V).
Data
1 Sets free run (Continuous).
2 Sets multi frames (MultiFrame).
3 Sets a single frame (SingleFrame).
1 Executes start of image transfer.
0 Executes stop of image transfer.
2 - 255 Sets the frame count of multi frames.
62500 - Sets the frame rate. [fps]
180000000
Description
2)
2)
2)
3)
3)
3)
2)
3)
Description
1)
25