Making/Answering Calls; Making Calls - Panasonic KX-TG8022E Operating Instructions Manual

TG8021E(e).book Page 18 Friday, June 13, 2008 1:19 PM

Making/Answering Calls

Making calls

1
Lift the handset and dial the phone
number.
L To correct a digit, press {C/T}.
2
{C}
3
When you finish talking, press
{ih} or place the handset on the
base unit or charger.
Using the speakerphone
1
Dial the phone number, and press
{s}.
L Speak alternately with the other
party.
2
When you finish talking, press
{ih}.
Note:
L For best performance, use the
speakerphone in a quiet environment.
L To switch back to the receiver, press
{C}.
Adjusting the receiver or speaker
volume
Press {^} or {V} repeatedly while
talking.
Making a call using the redial list
The last 10 phone numbers dialled are
stored in the redial list (each 24 digits
max.).
1
j (right soft key)
2
{V}/{^}: Select the desired phone
number.
3
{C}
Editing/erasing/storing
1
j (right soft key)
2
{V}/{^}: Select the desired phone
number. i K
18
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333
3
Proceed with the desired operation.
■ Editing a number before
calling:
{V}/{^}: "Edit and Call" i
M i Press {<} or {>} to
move the cursor. i Edit the
number. i {C}
■ Erasing a number:
{V}/{^}: Select "Erase" or
"Erase All". i M i
{V}/{^}: "Yes" i M i
{ih}
■ Storing a number to the
phonebook:
{V}/{^}: "Add Phonebook" i
M i To store the name,
continue from step 3, "Adding
entries", page 21.
Note:
L When editing:
– To erase a number, place the cursor
on the number, then press {C/T}.
– To insert a number, place the cursor
to the right of where you want to
insert the number, then press the
appropriate dial key.
Pause (for PBX/long distance service
users)
A pause is sometimes required when
making calls using a PBX or long
distance service. When storing a calling
card access number and/or PIN in the
phonebook, a pause is also needed
(page 23).
Example: If you need to dial the line
access number "0" when making outside
calls with a PBX:
1
{0} i l
2
Dial the phone number. i {C}
Note:
L A 3 second pause is inserted each
time l is pressed. Repeat as
needed to create longer pauses.