Battery Charge - Panasonic KX-TG8022E Operating Instructions Manual

TG8021E(e).book Page 14 Friday, June 13, 2008 1:19 PM
Preparation
1
Firmly press the notch on the
handset cover and slide it in the
direction of the arrow.
2
Insert the batteries negative (T)
end first. Close the handset cover.
Rechargeable Ni-MH ONLY
Important:
L If the handset does not automatically
turn on after installing/replacing
batteries, press {ih} for about 1
second, or place the handset on the
base unit or charger.
Note:
L When replacing batteries, remove the
old batteries.
14
Helpline Tel. No.: U.K. 0844 844 3898 R.O.I. 01289 8333

Battery charge

Place the handset on the base unit or
charger for about 7 hours before
initial use.
L While charging, "Charging" is
displayed and the charge indicator on
the handset lights up. When the
batteries are fully charged, "Charge
Completed" displays. The charge
indicator stays lit even after the
batteries are fully charged.
Base unit Charger
*1 KX-TG8022/KX-TG8023/
KX-TG8024
Note:
L It is normal for the handset to feel
warm during charging.
L If you want to use the unit
immediately, charge the batteries for
at least 15 minutes.
L Clean the charge contacts of the
handset, base unit, and charger with a
soft, dry cloth once a month. Clean
more often if the unit is exposed to
grease, dust, or high humidity.
*1