InFocus IN2128HDa User Manual page 45

2
The Tools page allows you to manage the projector, configure the LAN
control settings and remotely access the network operations of this projector.
i
i. This area is only used with a Crestron Control System. Please contact Cre-
ston or refer to the Crestron user manual for setup information.
ii. This area is used for naming the projector, associating it with a particular
location, assigning a responsible party to it, and adjusting network settings.
iii. This area is used to set User and Admin passwords. When password protec-
tion is enabled, unauthorized changes to the projector configuration will be
avoided.
• To prevent errors, only enter alphanumeric characters on the Tools page.
• After configuring the settings, press the Send button and the data will be
saved in the projector.
• Press exit to go back to the Crestron remote network operation page.
ii
iii
Please pay attention to the input length and character limitations (including
character and punctuation restrictions) listed below:
Category Item Input-Length
Crestron Control
Projector Name
Projector
DHCP (Enabled)
Network
Configuration
Default Gateway
User Password New Password
Admin Password New Password
/ > < $ % + \ ' " are prohibited.
44
Maximum Number of
Characters
IP Address
IP ID
Port
Location
Assigned To
IP Address
Subnet Mask
DNS Server
Enabled
Confirm
Enabled
Confirm
15
2
5
10
9
9
(N/A)
15
15
15
15
(N/A)
20
2
(N/A)
20
20