3
To access the Admin page, enter the password. The default password is
"0000". If you forget the password, please go to Advanced Menu > Setup >
Network > Restart Network to restore the password to the default
•
Information: Displays the status, wired LAN, and wireless LAN information.
•
Network Settings: Provides network settings.
•
Email Alert: Allows you to setup the mail server and send system error
messages to your network administrator.
•
Control Panel: Provides some OSD menus such as Basic Menu, Image,
Setup, Status/Service for adjusting the projected pictures. See page 25 for
details.
•
Basic Menu: Provides some common adjustments in Basic Menu.
•
Image: Provides some common adjustments in Image settings under
Advanced Menu.
•
Setup: Provides some common adjustments in Setup settings under
Advanced Menu.
•
Status Service: Provides Reset Lamp Hours and Factory Reset settings.
•
Crestron Control: Displays the Crestron eControl user interface. See
page 43 for details.
About Crestron e-Control
1
The Crestron e-Control
code.
projector or adjust the projector's image.
You can press </>
to reveal more
buttons.
i.
These buttons function the same as the OSD menus and remote control
functions.
•
Source List: To switch the source, click on the desired source.
•
Menu: Use to go back to the previous OSD menu, exit and save menu
settings.
•
When you use the projector control panel or remote control to change the
OSD menu settings, it may take a while for the web browser to synchronize
these changes with the projector.
43
®
®
page provides a variety of virtual keys to control the
i
i