Advanced Menu - InFocus IN2128HDa User Manual

Advanced Menu

Advanced Menu
Image:
3D Control:
3D: allows you to enjoy 3D (stereoscopic) content. Your projector supports Auto,
Top-Bottom, Frame Sequential, Frame Packing, Side-by-Side formats for controlling
LCD shutter glasses. In addition to the projector, you will need a pair of 3D shutter
glasses, 3D content, and 3D compatible source. Ensure the glasses you choose are con-
sistent with the synchronization mode you will be using.
3D Sync Invert: If the image appears to flutter, look odd or if the image depth looks off
or you experience eye strain, turn this feature on to see if the image improves.
Color
Color
: adjusts a video image from black and white to fully saturated color. The color
setting applies to NTSC video sources only.
Red/Green/Blue Gain
: adjusts the gain of the red, green or blue channel of the image.
Red/Green/Blue Offset
: adjusts the offset of the red, green or blue channel of the
image.
Color Space
: applies to computer and component video sources. It allows you to
select a color space that has been specifically tuned for the input signal. When Auto is
selected, the projector automatically determines the standard. To choose a different
( )
Advanced Menu
MDL: IN2128HDa
FW: X.XX
Image 3D Control
Setup Color
Status/Service PC
Video
Basic Menu
setting, turn off Auto, then choose RGB for computer sources or choose either
REC709 or REC601 for component video sources.
Color Temperature
: changes the hue of the colors. Select a listed relative warmth
value.
Gamma
: select the appropriate gamma from among Video, Film, Bright, and CRT.
Tint
: adjusts the red-green color balance in the image of NTSC video images. The tint
setting applies to NTSC video sources only.
W
hite Intensity: increases the brightness of whites that are near 100%.
PC:
Force Wide
: when this is off, the analog locking algorithms choose the standard mode
resolution (4:3) as the preferred default resolution. When this is on, the analog locking
algorithms choose wide mode resolution (16:10) as the preferred default resolution.
Phase
: adjusts the synchronization of the pixels to the pixel clock on analog computer
sources.
Prevent PC Screen Saver
mode. The projector must be connected to the PC via a Type-B USB cable for this fea-
ture to work.
Sync Threshold
: (progressive signals only) If a hardware device, such as a DVD player,
is not syncing properly with the projector, select this option to help it to sync when
connected to the projector.
Tracking
: adjusts the pixel clock rate on analog computer sources.
Horizontal/Vertical Position
Video:
Detect Film
: determines whether the original source of the input video was film (pro-
gressive) or video (interlaced).
Overscan
: crops video sources to remove noise from outside the image.
Set Black Level
: analyzes the current input image and calculates an offset value which
is then added to the analog to digital converter black level value. This ensures optimum
black level for each analog source.
27
: prevents your computer from going into Screen Save
: adjusts the position of a computer source.