Installing And Cabling Enclosures - R/Evolution 2730 Getting Started Manual

2
CH A P T E R

Installing and Cabling Enclosures

This chapter describes how to install and cable enclosures in a standard 19-inch EIA
rack cabinet. It contains the following sections:
"Safety Precautions" on page 24
■
"Unpacking an Enclosure and Verifying its Contents" on page 25
■
"Unpacking Rackmount Kits" on page 26
■
"Preparing the Rack" on page 27
■
"Installing Enclosures in a Rack" on page 27
■
"Connecting Controller and Drive Enclosures" on page 33
■
"Connecting AC Power" on page 37
■
"Testing the Enclosure Connections" on page 41
■
"Next Steps" on page 42
■
The installation procedures in this chapter require the following items:
#2 Phillips screwdriver
■
Standard screwdriver
■
Allen wrench (provided; used with 6-mm screws and #12-24 x 3/8-inch
■
sockethead screws)
Antistatic protection devices
■
23