Clarion fz102e Ower's Manual page 7

Radio Mode Operations
CAUTION
Please disable TA standby mode if broad-
casting stations in your country do not
support RDS. Otherwise, you may face
difficulties searching for station.
Traffic announcement (TA)
Setting the TA standby mode
Press the [TA] button during TA indicator off.
Searching for a TP station
Press the [TA] button during TP indicator off.
Note:
TP indicator lit on when a TP station is found.
TA interrupts
In the TA standby mode, when a traffic announce-
ment broadcast starts, "TRA INFO" appears in
the display. The traffic announcement broadcast
is received as top priority regardless of the func-
tion mode so you can listen to it.
Cancelling an traffic announcement
Press the [TA] button during TA interrupts.
Cancelling the TA standby mode
Press the [TA] button during TP and TA indicator
on.
Note:
TA standby mode is also cancelled when [TA]
button is pressed during TP station searching
operation.
Emergency broadcasting
Emergency broadcast
If an emergency broadcast is received, all the
function mode operations are stopped.
"ALARM" appears in the display and the emer-
gency broadcast can be heard.
Cancelling an emergency broadcast
Press the [TA] button during interrupts.
Volume setting of TA, emergency
broadcast (ALARM) and PTY
During a TA, ALARM or PTY interrupt, turn the
[ ] rotary knob to set the volume to the
desired level.
When the TA, ALARM or PTY interrupt ends, the
volume returns to the level it had before the inter-
rupt.
The factory default setting is "15".
Other RDS adjustment can be performed in
Adjustment mode. Please refer to "Adjustment
Mode" for further details.
7
FZ102E