Basic Operations - Clarion fz102e Ower's Manual

4. BASIC OPERATIONS

CAUTION
!
Be sure to lower the volume before
switching off the unit power or the ignition
key. The unit remembers its last volume
setting. If you switch the power off with the
volume up, when you switch the power back
on, the sudden loud volume may hurt your
hearing and damage the unit.
Be careful about using this unit for a long
time without running the engine. If you drain
the car's battery too far, you may not be
able to start the engine and this can reduce
the service life of the battery.
Power on/off
Turn on the power
Push the [ ] rotary knob during power off.
* The mode before turning off the power will be
displayed.
Turn Off The Power
Push longer the [
Source mode
Turn On The Power
Push the [ ] rotary knob to select the
desired source.
Radio USB AUX
Adjusting The Audio
Adjusting The Volume
Adjust with the [
Range Default settings
0 to 33 13
] rotary knob.
.
Radio..
] rotary knob.
Switching The Audio Mode
Adjust with the [
1. Press the [ ] button to select the desired audio
mode.
"BASS" "TREB"
previous display
2. Adjust the audio mode with the [
knob
.
Audio Mode Range
BASS (Bass) -7 to +7
TREB (Treble) -7 to +7
BAL (Balance) L12 to R12
FAD (Fader) F12 to R12
Note:
Fader adjustment is not available in 24V power
supply model.
Setting The Loudness On/Off
1. Press longer the [
activate loudness effect.
* The factory default setting is "OFF".
2. The loudness effect emphasizes the bass and
treble to create a natural sound tone. When
you are listening to music at low volume,
it is recommended to use the loudness
effect. The loudness effect will depend on
volume level.
] rotary knob.
"BAL" "FAD"
] rotary
Default settings
0
0
0 (CENTER)
0 (CENTER)
] button to activate/de-
FZ102E
5