Volvo S80 Owner's Manual page 75

S80 volvo
Hide thumbs Also See for S80:
Table of Contents

Advertisement

WARNING
If the brake and ABS symbols are illumi-
nated at the same time, there is a risk that
the rear end will skid during heavy braking.
Warning
The red warning symbol illuminates when a
fault has been indicated which could affect the
safety and/or driveability of the car. An explan-
atory text is shown on the information display
at the same time. The symbol remains visible
until the fault has been rectified but the text
message can be cleared with the OK button,
see page 198. The warning symbol can also
illuminate in conjunction with other symbols.
Action:
1. Stop in a safe place. Do not drive the car
further.
2. Read the information on the information
display. Implement the action in accord-
ance with the message in the display. Clear
the message using the OK button.
Reminder – doors not closed
2
If one of the doors, the bonnet
not closed properly then the information or
warning symbol illuminates together with an
explanatory text message in the combined
2
Only cars with alarm*.
instrument panel. Stop the car in a safe place
as soon as possible and close the door, bonnet
or boot lid, whichever is open.
If the car is driven at a speed lower than
approx. 7 km/h then the information
symbol illuminates.
If the car is driven at a speed higher
than approx. 7 km/h then the warning
symbol illuminates.
Trip meter
Trip meter and controls.
or boot lid is
Display for trip meter
Controls for switching between trip meters
T1
and
T2
meters
03 Your driving environment
, as well as resetting the trip
*
Option/accessory, for more information, see Introduction.
Instruments and controls
The meters are used to measure short dis-
tances. The distance is shown in the display.
One short press on the control switches
between the two trip meters
T1
and
press (more than 2 seconds) resets the cur-
rently displayed trip meter.
Clock
Clock and setting knob.
Display for showing the time
Controls for setting the clock
Turn the knob clockwise/anticlockwise to set
the clock. Turn first to the end position and then
turn past/over the end position a further
approx. 1 mm - a "click" sounds and is felt in
T2
. A long
03
73

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents