Volvo S80 Owner's Manual page 342

09 Maintenance and service
Lamps
09
At the same time, guide out the con-
nector with your other hand.
4. Lift out the headlamp and place it on a soft
surface to avoid scratching the lens.
5. Replace the bulb in question.
Securing the headlamp
1. Plug in the connector, a clicking sound
should be heard.
2. Reinstall the headlamp and locking pins.
Check that they are correctly inserted.
3. Check the lighting.
The headlamp must be mounted and the con-
nector correctly installed before the lighting is
switched on or the remote control key is
inserted into the ignition switch.
340
Removing the cover
Before starting to replace a bulb, see
page 339.
1. Open the lock clamp by pressing up/out.
2. Press down the clips on the cover and
remove it.
Reinstall the cover in reverse order.
Dipped beam, halogen
1. Detach the headlamp, see page 339.
2. Remove the cover.
3. Unplug the connector from the bulb.
4. Detach the bulb by pressing the holder
downwards.
5. Fit the new bulb in the socket and snap it
in. It can be secured in one position.
Reinstall the parts in reverse order.