Panasonic CF-18 Series Reference Manual page 36

Security Measures
To disable the User Password, start up the Setup Utility with the Supervisor Password.
1
Run the Setup Utility. (
2
Using either
3
Using either
4
Only when the User Password has been set:
Enter your password at [Enter Current Password] and press
5
Enter your password at [Enter New Password] and press
To disable the User Password
Press only Enter.
6
Re-enter your password at [Confirm New Password] and press
Enter
.
To disable the User Password
Press only Enter.
7
At [Setup Notice], press
8
F10
Press and select [Yes], then press
CAUTION
Do not forget your password. If a password is forgotten, you will be unable to use your
computer. If this happens, ask a person who knows the Supervisor Password.
When running the Setup Utility, do not leave your computer even for a short time, as
the possibility exists for the password to be set/changed by another person.
NOTE
Your password will not be displayed on the screen.
Only up to seven alphanumeric characters can be used.
• There is no distinction between upper and lower case letters.
• Use only the upper horizontal row of numeric keys to input your password.
• Do not input your password while holding down on Shift or Ctrl.
page 77)
or , select [Security].
or , select [Set User Password] and press
Enter
.
36
Enter
Enter
Enter
.
.
Enter
.
.