Panasonic CF-18 Series Reference Manual page 18

Touch Pad
When you want to re-enable the touch pad
8
Following the operating instructions of the connected external mouse
or trackball, install the necessary driver.
NOTE
When you want to use the PS/2 compatible mouse:
A
Select [start] - [Control Panel] - [Performance and Maintenance] - [System] -
[Hardware] - [Device Manager] - [Mice and other pointing devices].
B Select [touchpad], then select [Update Driver] at [Driver].
C
Select [Install from a list or specific location] and select [Next].
D
Select [Don't search. I will choose driver to install.], then select [Next].
E Select [PS/2 Compatible Mouse], then select [Next].
F
At the confirmation message, select [Yes].
G
Select [Finish], then select [Close].
H The display will ask you to restart Windows, select [Yes].
The computer will restart.
1
Uninstall the driver or application software of an external mouse or
trackball. (Refer to the operating instructions of the external device on
how to uninstall the driver.)
If the explanation of uninstalling the driver or application software can not be found
in the operating instructions for the external device, execute the following steps.
A
In [start] - [Control Panel] - [Performance and Maintenance] - [System] -
[Hardware] - [Device Manager], when an external mouse or trackball device is
displayed in [Mice and other pointing devices], press Del to delete it.
B
If the confirmation message is displayed, select [OK].
2
If the display asks you to restart Windows, select [No].
3
Power off your computer (⇒ Operating Instructions "Starting Up/
Shutting Down") and remove the external mouse or trackball.
18