Fast User Switching Function - Panasonic CF-18 Series Reference Manual

Dealing with Problems (Advanced)
Touch Pad / Digitizer
Unable to use the digitizer function
Sound
The sound is not heard
Volume does not change when
Fn+F5 or Fn+F6 is pressed
The audio is distorted
When starting Sound Recorder, it
displays the message: "There was an
error updating the registry"

Fast User Switching Function

Some applications may not work
properly
Has the Setup Utility been used to set [Digitizer] to [Enable]?
You can use only the pen included with the computer to use the digitizer
function.
It is necessary to perform [Calibration] to point correctly with the pen included
with the computer.
Try changing the mute by pressing Fn+F4 or Fn+F6.
If the Windows sound function is not active, the volume will not change even if
is displayed.
Audio distortion may occur when operations are performed by pressing Fn in
combination with another key. Stop playing and start again.
Sound Recorder displays this error message when started by a user with a
limited account if the user's language setting is different to that of the user with
the administrator authority which last started it. This will not affect the operation
of the computer.
When switching to a different user with the Fast User Switching function, the
following problems may occur.
• Some applications may not work properly
• Key combination with Fn may not work.
• It may not be possible to set the settings of the display.
• Wireless LAN may be used.
In this case, log off all users without using Fast User Switching function, and try
the operation once more. If the problem persists, restart the computer.
102